10
Warning label
First hole
First V-ring
1
2
3
4
(7)
(6)
Place the jump mat
(7)
with attached enclosure
on clear ground inside the frame.
Make sure the two warning decals
align with two T-joints!
STEP 7
Place the enclosure net
(6)
onto the jump mat
(7)
, and make sure the first hole
(the
hole directly to the left of the enclosure door zipper)
and the first V-ring
(the V-ring
directly to the left of the warning label)
line up. Now insert the
first V-ring
into the
first hole
. Then, insert the
remaining V-rings
into their
corresponding holes.
Once
you’ve finished, the enclosure net should be fully attached to the jump mat.
Enclosure Net
(x1)
6
Enclosure door
T-joint
T-joint
Warning label
Warning label
STEP 8
ASSEMBLY
