11
STEP 9
You may want to use gloves for this step!
Before you begin, make sure each
V-ring has been threaded through the holes on the enclosure net.
Make sure
the enclosure door is lined up with a T-joint.
Using the spring tool, hook the
smaller end
of a spring into the
V-ring
just
left of the enclosure door.
Stretch
the free end of the spring until it reaches the
frame hole
just
left of the T-joint.
Springs
(x1)
Spring Tool
(x1)
9
18
STEP 10
Now,
repeat step 9
on the
other side
of the trampoline. Make sure to hook the
smaller end
of a spring into the
V-ring
just
left of the warning label then
stretch the
free end of the spring until it reaches the
frame hole
just
left of the T-joint.
You now have attached two V-rings to the frame holes using two springs.
Springs
(x1)
9
(9)
Enclosure door
(18)
First V-ring
First hole
T-joint
Enclosure door
