24
6
Press down on the middle of the trampoline frame slightly
on both sides and allow the trampoline to gently lower to
the ground, as shown.
7
Dissassembly the brace legs by taking out the locking pins.
Clip the brace legs to the middle leg tubes by using the clips
as shown on the insert drawing.
5
Hold up on the middle of the frame and fold the brace legs
over, onto the jump mat, as shown.
Make sure two adults
do this step with holding the frame carefully at the same
time.
Brace Leg
Pin
Clip
Clip
Brace Leg
The insert drawing
3
Remove the indicated Lock Pin from the Socket Pin.
Then two persons open the socket pins from two sides
as shown at the same time.
Socket Pin
Lock Pin
4
Make sure you finish the step 2 and 3 above before
you start this step.
Follow step 3, move the support
leg(12) out as shown.
12
Socket Pin
Lift & Push
Lift & Push
Lift & push the frame assemblies from both sides as the
arrows show,until the two halves of the trampolines frames
come together as shown.
8
