18
13
One hand lift the frame tube, have another hand turn over the “T” joint(7) as the arrow direction, until the socket
pin is inserted into the spacer completely. Insert the pin into the pin hole as the right drawing shown. Repeat this step
to assemble another “T” joint(7) (not shown).
14
Attached the support leg
(
12
)
to the “T” joint(7) with M8X40mm
(
23
)
and M8 Locknut(26). Make sure
the bolt is inserted from the hex hole side of the joint(7). Note: be sure the warning side of the support let
faces out.
7
Spacer
Socket Pin
Socket Pin
INSIDE of assembly
OUTSIDE of assembly
Pin
Pin Hole
Pin Hole
Support Leg
Warning Label
24
26
7
12
12
Two persons lift the frame assembly up from two sides as left picture shown, until the top frame is level as right picture
shown
。
Left
Right
