WALSER GmbH & Co. KG
Senefelderstrasse 23
86368 Gersthofen
Germany
www.walser.de
Made in China
Atelierstaffelei L 165 cm, XL 180 cm, XXL 205 cm
Easel L 165 cm, XL 180 cm, XXL 205 cm
2. Setting up the easel
Unlock the clamps on the three legs. Pull out the
legs to the desired length. Lock the clamps so that
the legs will stand securely. Do the same with the
middle column until it reaches the desired height.
3. Attaching the canvas holder
The canvas holder can be easily placed
onthe easel without any tools by hooking
it onto the screw heads.
NOTICE
Note that the easel only reaches its maximum stability after mounting the canvas
holder, inserting the middle column into the center strut and the eyelet of the canvas
holder and finally tightening all the screws. The image shows a lesser stable configu
-
ration. Please keep this in mind when moving the easel!
middle
column
clamps
4. Final position
The canvas holder‘s final position is secured by tightening the knurled screws on the
back of the canvas holder. Ensure that the canvas support is positioned level. The
canvas support can be easily adjusted to any desired height by loosening the screws.
The leg angle may have to be adjusted and / or the canvas support may have to be
re-mounted if you want to change the height of the canvas support. This may mean
temporarily opening the locks. You can adjust the tilt angle of the painting canvas by
adjustment of the easel‘s rear leg.
5. Using the middle strut and final assembly
of the easel
To reach maximum stability it is recommended that you correctly
place the canvas support, insert the middle strut into the eyelet
and lock the the screws of the canvas support and the easel
shoulder.
6. Using the clamp
The spring-loaded clamp system on the top of the middle strut
securely fixes the canvas in place and prevents it from slipping or
tumbling.
Operating hints:
The Walimex pro workshop easel features tray holders that can folded out from the middle
of the picture holder. You can place paints or other utensils in it. This easel also features a
brush and cloth holder on the left and right under the canvas support.
If necessary, a weight can be attached to the fixing strap. This gives the easel extra
stability.
NOTICE
Please follow all instructions in this manual to achieve maximum stability of the
easel. It may be necessary to retighten all screws. Use the screen clamp at the top of
the centre column for maximum stability.
Always mount the canvas
holder centered, never
off-center!
When mounting the
canvas holder, mind the
equidistance of the moun-
ting holes to the center.
You can increase the stability of the canvas
holder by tightening the holder screws on
the front with a screwdriver.
