50
Installation of the Separable Speed System on the in-flight direction left side:
On the in-flight direction left side, the ac-
celerator, as well as the Leg Stirrups
is installed in the same manner as with
most harnesses:
The end of the left accelerator line is
connected firmly with a loop to the left
end of the speedbar (Situation1).
Then the line is fed first through the small ring, next inside through the grommet on the
harness and then through both pulleys in the area of the seat board.
Finally, the brummel hook is knotted with a palstek and with that the correct length is
achieved.
Palstek instructions:
http://www.sailornet.at/palstek.htm
Situation 1
