___________________________________________________________________________________________________________
REV 6/7/11 Page 13 of 14
Skytech 3301P BE
QUICK SET-UP GUIDE
FOR SKYTECH 3301PBE PROGRAMMABLE TRANSMITTER
This guide is a “short cut” method to SETUP and OPERATE the SKYTECH programmable
transmitter. For detailed instructions for each feature and function, see OWNER”S MANUAL.
INITIAL SET-UPSET FUNCTIONS USING BUTTONS ON FRONT OFTRANSMITTER
1. Remove battery cover.
2. Insert 2AAA batteries.
3. Press SETTING button.
4. Replace battery cover.
All further programming
to be made on front of
transmitter.
OPERATION
– Press MODE button on TRANSMITTER to change operating functions.
1 ON indicates the system is on, either manually or
thermostatically.
2 OFF indicates the entire system is turned off.
3 THERMO indicates the system will automatically
cycle ON/OFF, depending on programmed SET
temperature.
4 PROGRAM indicates the system is operating with
PROGRAMME settings.
OTHER OPERATIONS
– Press corresponding buttons on TRANSMITTER to activate functions.
TIME OF DAY – Press TIMER/TIME button for less than ONE second.
TIME OPERATION – Press and hold TIMER/TIME button for two seconds.
COUNTDOWN TIME -- pressing UP or DOWN buttons.
NOTE: Press SET button to stop LCD Digits from flashing.
1. SCALE (DEGREE F/ DEGREE C) –
Press UP or DOWN button. Press SET
button.
2. DAY OF WEEK – Press AHEAD or
BACK button. Press SET button.
3. HOUR OF DAY – Press UP or DOWN
button. Press SET button. NOTE: AM
or PM on LCD.
4. MIN. OF DAY – Press UP or DOWN
button. Press SET button.
NOTE: Each SETTING will flash,
separately, on LCD screen. After each
SETTING you
must push SET button.
You may not have to change factory
setting, but you must push SET button.
Setting
Button
TIME
AM
WE
OVERRIDE HOLD
1
4
3
2
FLAME
1
SU
NITE
PROGRAM
ON
THERMO
OFF
1 2
3
4
UP
DOWN
MODE
TIMER
TIME
SET
PROG
AHEAD
BACK
UP
DOWN
MODE
TIMER
TIME
SET
PROG
AHEAD
BACK
f i r e - p a r t s . c o m
