background image

Limited Lifetime Warranty 

 

SKYTECH II warrants the SKYTECH REMOTE CONTROL SYSTEM for a Limited Lifetime of the original 

owner of this system. This warranty is not transferable to another person it is for the original purchaser of the 

product. Should any part fail because of defective workmanship or material from the original date of purchase. 

SKYTECH II will repair or, at SKYTECH II option, replace the defective parts. 

 

Replacement parts will be available at no charge for the first (5) five years of this warranty, and will be 

available at market cost for the Lifetime of the product to that original owner. If SKYTECH II does not have the 

parts for an individual model, then a replacement SYSTEM will be provided. At no charge for the first (5) five 

years and sold at market cost for the Lifetime of that product to the original owner

 

The Owner must provide a bill of sale, cancelled check, or payment record should be kept to verify purchase 

date and establish warranty period. Travel, diagnostic cost, service labor to repair the defective SYSTEM, and 

freight charges on warranty parts to and from the factory will be the responsibility of the owner. SKYTECH will 

not be responsible for labor charges and/or damage incurred in installation, repair, replacement, or for 

incidental or consequential damages. Batteries and any damage caused by them are not covered by them are 

not covered by this warranty. 

 

This warranty does not cover claims, which do not involve defective workmanship or materials. 

 

Damage to the SYSTEM caused by accident, misuse, abuse, or installation error, whether performed by a 

contractor, Service Company, or owner, is not covered by this warranty. Modification of the SKYTECH product 

will void this warranty.

 

 

IN NO EVENT SHALL SKYTECH BE LIABLE FOR INCIDENTAL AND CONSEQUENTIAL INCLUDING THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS, ARE LIMITED TO THE DURATION OF THIS WRITTEN 

WARRANTY. THIS WARRANTY SUPERSEDES ALL OTHER ORAL OR WRITTEN WARRANTIES. 

 

Some States do not allow the exclusion or limitation of incidental and consequential damages or limitation on 

how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you 

specific rights and you may have other rights, which vary from state, province, and nation. 

 

How to Obtain Service: 

Contact SKYTECH II or your SKYTECH Dealer direct with the following information: 

Name, Address, Telephone Number of Owner 

Date of Purchase, Proof of Purchase 

Model Name, Date Code 

 

Any relevant information or circumstances, e.g., installation, mode of operation when defect was noted. 

 

Warranty claim process will start with all of this information. SKYTECH will reserve the right to physically 

inspect the product for defects, by authorized representatives. 

 

Detach at this line for return to: Skytech II  9230 Conservation Way, Fort Wayne, IN 46809  Telephone:  (888) 672-8929 
 

Purchase Date:  

 

 

          Model: 

 

 

           Date Code: 

 
Purchased From: 

 

 

 

 

 

Date: 

Customer 
Name   

 

 

 

 

 

 

Number of Santa’s Helpers 

 
Address 
 
City 

 

 

 

State/Prov. 

 

 

 

Zip/Postal Code 

 
Credit Card Number  

 

 

 

 

 

 

Expiring Date

 

(Visa and MasterCard Only)       See other side for a special offer for all Remote control Customers 

 

f i r e - p a r t s . c o m

Summary of Contents for 3301P BE

















Reviews: