Align F9A so the rivet details face rearward and glue in place
Align and glue F10A thru F18A.
Note: there is no F11A!
Cut a piece of 1/4" x 1/4" balsa to fit to top slot in F1A thru
F6A. Glue in place.
**Electric Only**
Fit a piece of 1/4" x 1/4" balsa in the top
slots of F1AE & F2AE. Also F5AE and F6A.Glue in place.
Cut and fit a piece of 1/4" x 1/4" balsa from F12A thru F18A.
Glue in place.
Fit and glue a piece of 1/4" x 1/8" x 36" balsa stringer into the
bottom slots on each side of F1A thru F18A.
Do not glue to
the removable center parts on F7A & F10A.
**Electric Only**
Cut two pieces of 1/4" x 3/8" balsa to 6-
1/2" and glue in place in the slots in F1AE thru F5AE.
