Ailerons:
Assembly of the Ailerons, Elevators and Rudder can be done
with thin CA for clean, lightweight construction.
Slide A3 - A11 into the slots in A1. Glue in place with thin CA.
Glue A2 to the end of A1 (make sure it is square). Glue A12
to the opposite end of A1 insuring it is square. Repeat for the
other aileron.
Center the aileron assembly on A13 as shown and glue in
place.
Align and glue A14 to A1, A2, A3 & A4 as shown. Repeat for
the other aileron.
Sand A13 to match the contour of the ribs.
Elevators:
Slide E3-E11 into the slots in E1. Glue in place with thin CA.
Glue E2 to the end of E1 (make sure it is square).
Repeat for the other elevator.
Align the elevator assembly on E12 and glue in place making
sure that E2 is flush with the large end of E12.
