SKYLOTEC Jackpod Davit, Instructions Of Use

Page: 22 / 198

22
EN
1.2 Work positioning
The Jackpod Davit Arm may also be equipped with a winch to be used for the suspension of a worker at
an elevated position for the performance of a task. When a worker is suspended in a work seat or harness,
a secondary personal fall arrest system must be used which meets local requirements.
1.3 Rescue
The Jackpod Davit Arm, base, and winch may be used employed as part of a system meeting the requi-
rements of ANSI/ASSE Z359.4 for the rescue of a fallen worker.
1.4 Confined space entry / retrieval and rescue
The Jackpod Davit Arm, base, and winch, may be used as part of a system to facilitate access to and
egress from a confined space as well as non-entry rescue in the event of an emergency. When used with
an approved Skylotec mounting base and winch, the Jackpod Davit System meets the requirements of
OSHA 1910.146, and ANSI/ASSE Z117.1 for use as a confined space entry/retrieval and rescue device.
1.5 Fall protection while climbing
In situations where it is not practical to install and use a temporary or permanently installed personal
fall arrest system, the Jackpod Davit Arm may be combined with a suitable Skylotec mounting base and
winch to guard against falling while climbing a ladder or other structure. The winch line can be used an
extendable anchorage connector that moves up and down with the climber. An energy absorbing
Lanyard installed between the winch line and the dorsal D-ring on the climber’s full body harness absorbs
fall energy and reduces the arresting forces in the event of a fall. The winch must be operated so as to
continuously eliminate any slack in the winch line as the climber moves up and down. The winch operator
must be specifically instructed in such use of this equipment. All such installations must be designed,
installed, and used under the supervision of a qualified person.
1.6 Material handling
The Jackpod Davit Arm, when combined with a suitable Skylotec mounting base and winch, may be used
for the raising and lowering of tools, equipment, and other material not exceeding the rated Working Load
Limit of any system component.
NOTE: Some jurisdictions may not allow the use of the same equipment to move personnel and material.
Be aware of and follow the regulations governing your workplace.