KYJACK, Page 32
JIII eries
ection 1 - cheduled Maintenance
Function Tests
Pothole Protection
Device
Pothole Protection
Device
Conventional
Compact
Test Elevated Drive peed
wARNiNG
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
1. Ensure path of intended motion is clear.
2. Raise the platform until approximately a
height of 7 feet (2 meters) is reached and
attempt to drive forward or reverse.
Result:
Aerial platform should move slower
than when it was in stowed position.
Test Tilt ensor - AN I/C A
wARNiNG
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
wARNiNG
Ensure that there are no personnel
or obstructions in the path of travel,
including blind spots.
1. Move the aerial platform on to a slope not
greater than 4.5°.
2. Use the ladder to dismount from
platform.
3. On base control console, slowly raise the
platform.
Result:
When platform reaches an
appropriate height, a warning signal
should sound and platform stop raising
as lift and drive controls should be
disabled.
