Skyjack SJ6832 RTE Series, Operation Manual

Page: 81 / 112

81
SJ6832 RTE
221844ACAI
Floor loading pressure Section 7 – Technical Specifications
7.6 Floor loading pressure
Model
Weights Pressures
MEWP
Weight
Max weight per
wheel/outrigger
pad
LCP** OFL**
kg kg kPa kg/m
2
SJ6832 RTE on tires
(foam-filled only)
Min* 3780 1675 1340 785
Max* 4430 1860 1490 925
SJ6832 RTE on
outrigger pads
Min* 3845 1675 325 650
Max* 4495 1860 360 760
1949AA
*
Min:
Minimum MEWP weight (Unloaded platform, no options/attachments)
Max:
Maximum MEWP weight (Platform loaded to capacity with options/attachments)
Wheel/Outrigger Load
is the weight that can be experienced on one wheel/outrigger.
Note: This is more than 25% of the machine weight due to possible weight distribution over the machine and
platform.
**
LCP:
Local Concentrated Pressure is a measure of how hard the MEWP presses on the area in direct contact
with the floor/tire/outrigger.
OFL:
Overall Floor Load (Pressure) is a measure of the average load the MEWP imparts on the whole
surface directly underneath the chassis. This has been calculated by dividing the MEWP weight by the
overall floor area occupied by the MEWP (on wheels/outriggers).
Note: The floor covering (e.g., tile, carpet, etc.) or the structure (e.g., beams) of the operating surface must
be able to withstand more than the values indicated above.
WARNING
Do not use tires other than the tires that Skyjack
specifies for this MEWP. Do not mix different types
of tires or use tires that are not in good condition.
Only replace the tires with the same types that are
approved by Skyjack. Other tires can make the
MEWP less stable. If you do not obey, there is a risk
of death or serious injury.
NOTE
The LCP or OFL that an individual surface can withstand varies from structure to structure and is
generally determined by the engineer or architect for that particular structure.