Skyjack SJ6832 RTE Series, Operation Manual

Page: 47 / 112

47
SJ6832 RTE
221844ACAI
Function Tests Section 4 – Inspections Before Operation
4.3-19 Do a test of the outrigger interlocks
(optional equipment)
1.
Move the
lift/off/drive
switch
1
to the lift
position.
2.
Move and hold the
auto-level enable
switch
2
in the enable position.
3.
Move and hold the
auto leve
l switch
3
in the
extend position to extend all four outriggers 10
cm (4 in).
4.
Squeeze the
function-enable
switch
4
and
push the
controller handle
5
to raise the
platform
▪
Result:
The platform does not raise.
5.
Move and hold the
auto-level enable
switch
2
in the enable position.
6.
Move and hold the
auto level
switch
3
in the
retract position to fully retract all four outriggers.
▪
Result:
All four outriggers fully retract.
7.
Move and hold the
auto-level enable
switch
2
in the enable position.
8.
Move and hold the
auto leve
l switch
3
in the
extend position to extend all four outriggers.
When the first outrigger hits the ground
(observed as the initial movement), stop
lowering the outriggers, and observe all four
outriggers.
▪
Result:
All four legs have moved more than
5 cm (2 in) and all the pads are near the
ground.
9.
Resume the deployment of the outriggers until
the platform has leveled itself.
▪
Result:
All four outriggers extend until they
hold the MEWP weight and put the MEWP
in a level position. The outriggers stop
automatically when the platform is level. The
outrigger light
6
goes on.
2
3
6
1
4
5