Skyjack SJ6832 RTE Series, Operation Manual

Page: 39 / 112

39
SJ6832 RTE
221844ACAI
Visual and daily maintenance inspections Section 4 – Inspections Before Operation
4.2-9 Lift mechanism
Do the inspection that follows in sequence:
1
Sliders and rollers
▪
Make sure that the sliders and rollers on the
left and right side of the MEWP are correctly
attached.
▪
Make sure there is no visible damage.
▪
Make sure there is no dirt or blockages in the
slider or roller paths.
1.
Raise the platform (refer to
section 5.2
) and
deploy the maintenance support (refer to
section 6.9
).
2
Maintenance support
▪
Make sure that the maintenance support
is correctly attached and show no visible
damage.
3
Scissor assembly
▪
Make sure that the scissor assembly shows
no signs of visible damage, deformation, or
cracks in the weldments.
▪
Make sure all the pins and fasteners are
correctly installed.
▪
Make sure that the cables and wires have the
correct routing, and show no signs of wear
and/or physical damage.
4
Scissor bumpers
▪
Make sure that the bumpers are correctly
attached and have no visible damage.
5
Lift cylinders
▪
Make sure that the lift cylinders are correctly
installed.
▪
Make sure there are no loose or missing
fasteners.
▪
Make sure there is no indication of leaks or
damage.
6
Angle transducer
▪
Make sure that the angle transducer is
correctly attached.
2.
Retract the maintenance support into its storage
bracket. Refer to
section 6.9.
3.
Fully lower the platform.
2
5
1
1
4
3
4
6