manualshive.com logo in svg

Skyjack SJ 46AJ, Operating Manual

Share
Download
Skyjack SJ 46AJ Operating Manual Download Page 32

Page 32

December 2007

SJ 46AJ 

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings 

contained in this operating manual and on the aerial platform.

FAMILIARIZA

TION

FAMILIARIZA

TION

•  Test Positive Air Shutoff (If Equipped)

CAUTION

This function test should NOT be 

performed while the engine is running.

1.   Open engine compartment cover.

2.   On the base control console, lift switch 

guard and push rocker switch to “on” 
position. 

3.  Push rocker switch to “off” position. LED 

light should continuously illuminate. Walk 
back to the engine compartment side of the 
aerial platform.

 

Result: The shutoff valve should disengage 
after 20 seconds (refer to shutoff valve 
diagrams).

4.  Close engine compartment cover. Ensure 

switch is returned to “off” position and 
switch guard is down. 

Base Control Console 

Shutoff Valve 

Engaged

Shutoff Valve 

Disengaged

Positive Air Shutoff Option

Positive Air Shutoff 
Switch

Engine Compartment Side

Function Tests 

Section 2 - Familiarization

Summary of Contents for SJ 46AJ































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands