manualshive.com logo in svg

Skyjack SJ 46AJ, Operating Manual

Share
Download
Skyjack SJ 46AJ Operating Manual Download Page 10

Page 10

December 2007

SJ 46AJ 

Safety Rules 

Section 1 - About Your Aerial Platform

Safety Precautions (Continued)

Know and understand the safety precautions before going on to next section.

• 

DO NOT

 exceed the rated 

capacity of the aerial platform.

• 

DO NOT

 distribute load 

unevenly.

• 

DO NOT

 use under influence of 

alcohol or drugs.

• 

DO NOT

 attempt to free a snagged platform with 

lower controls until personnel are removed from 
the platform.

• 

DO NOT

 position the aerial platform against 

another object to steady the platform. 

• 

DO NOT

 place materials on the guardrails or 

materials that exceed the confines of the guardrails 
unless approved by Skyjack.

• 

DO NOT

 operate if aerial 

platform is not working properly 
or if any parts are damaged or 
worn.

• 

DO NOT

 leave aerial platform 

unattended with key in key 
switch.

Summary of Contents for SJ 46AJ































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands