Skyjack SJ 46AJ, Operating Manual

Page: 30 / 94

Page 30 December 2007
SJ 46AJ
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
FAMILIARIZA
TION
FAMILIARIZA
TION
• Test Platform Self-leveling
1. Lower boom to stowed position.
2. Adjust platform to a level position using
platform leveling switch.
3. Raise “ ” and lower “ ” main
boom through a full cycle.
Result: Platform should remain level at all
time.
• Test Emergency Power
1. On base control console, push in “ ”
emergency stop button to turn engine off.
2. On platform control console, push in “ ”
emergency stop button.
CAUTION
When operating on auxiliary power, do
not operate more than one function
at a time to avoid overloading 12-Volt
auxiliary pump motor. Do not use
emergency power unit continuously for
more than two minutes.
NOTE
To conserve battery power, test each
function through a partial cycle.
3. On base control console, pull out “ ”
emergency stop button.
4. O n b a s e c o n t r o l c o n s o l e , t u r n
off/base/platform (base/off/platform) key
switch to “ ” platform position.
5. Select “ ” emergency power
position from start/function enable/
emergency power switch and activate
each boom function.
Result: All selected functions should
operate.
6. Turn off/base/platform (base/off/platform)
key switch to “ ” base position.
7. Select “ ” emergency power
position from start/function enable/
emergency power switch and activate
each boom function.
Result: All selected functions should
operate.
NOTE
The emergency power unit has
two-minute duty cycle.
Base Control Console
Off/Base/Platform
Key Switch
Emergency
Stop
Base/Off/Platform
Key Switch
Emergency
Stop
Start/Function
Enable/
Emergency
Power Switch
Function Tests Section 2 - Familiarization