Skyjack SJ 46AJ, Operating Manual

Page: 31 / 94

SJ 46AJ
December 2007 Page 31
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
FAMILIARIZA
TION
FAMILIARIZA
TION
• Test Off/Base/Platform (Base/Off/Platform)
Switch
1. Ensure both “ ” emergency stop
buttons are pulled out.
2. Start engine.
3. On base control console, turn off/base/
platform (base/off/platform) key switch to
“
” off position.
Result: Engine should shut down and
aerial platform functions should not
operate.
4. On base control console, turn off/base/
platform (base/off/platform) key switch to
“ ” platform position.
WARNING
Ensure that you maintain three points
of contact to mount/dismount platform.
5. Enter platform and close gate.
6. On platform control console, select
“ ” on position from engine start/on/off
switch.
7. Select “ ” start position from engine
start/on/off switch to start engine.
8. Dismount from platform.
9. On base control console, attempt to
activate each boom and platform switch
while holding function enable switch.
Result: All boom and platform functions
should not operate while holding function
enable switch.
10. Push in “ ” emergency stop button to
turn engine off.
11. Pull out “ ” emergency stop button.
Base Control Console
Off/Base/Platform
Key Switch
Emergency
Stop
Base/Off/Platform
Key Switch
Emergency
Stop
Start/Function
Enable/
Emergency
Power Switch
Section 2 - Familiarization Function Tests