16
7.2.1 Danger
An electric cable or electric wire with damaged jacket or bad insula on might cause
electrical shocks as well as electrical leak. Before use, check the condi ons of all wires
and cables.
7.2.2 Advices
Be sure to well understand all the informa on contained in this manual. Every opera on
func on or procedure has to be thoroughly clear.
Before using any commands (switch, bu ons, lever), be sure it is the correct one. In case
of doubt, consult this manual.
7.2.3 Precau ons
The electric cable has to be compa ble with the power required by the machine.
Cables touching the
fl
oor or close to the machine need to be protected against short
circuits.
The oil reservoirs have to be
fi
lled un l the indicated level. Check and re
fi
ll if necessary.
7.3 Rou ne Inspec on
7.3.1 Advice
When checking the tension of the belts or chains, DO NOT insert your
fi
ngers between the
belts and the pulleys and nor between the chain and the gears.
7.3.2 Precau ons
Check the motor and sliding or turning parts of the machine in case of abnormal noises.
Check the tension of the belts and chains and replace the set when belts or chains show
signs of wearing.
When checking the tension of belts or chains DO NOT insert your
fi
ngers between belts
and pulleys, nor between the chains and gears.
Check protec ons and safety devices to make sure they are working properly.
33
-Abastezca el cuenco con los alimentos que serán procesados y encájelo en la base del
soporte, girando en el sen do horario hasta trabarlo (Fig. 03).
FIGURA 03
-Seleccione el ba dor que va a ser usado y conéctelo al disposi vo para encaje de ba dores
coincidiendo el pino del disposi vo con la raya del ba dor. Es necesario empujar y girar el
ba dor en el sen do an -horario, con la
fi
nalidad de trabarlo (Fig.04).
FIGURA 04
- Abaje la parte superior de la ba dora y aprieta el manípulo TRABA / DESTRABA (Fig.01
nº06).
3.1 Accionamiento
El accionamiento de la máquina es hecho apretando la Llave enciende / desliga (Nº 05
Fig.01) localizada en la parte superior de la máquina.
Summary of Contents for BPS-06-N
Page 24: ...24 11 Electric Diagram 25...
