6
1.2 Main Components
All the components that are part in this equipment are built with carefully selected
materials for each func on, in accordance with standard tests and Siemsen’s experience.
PICTURE 01
01– Head
02- Base
03- 05 liters capacity bowl
04– Speed control knob
05 - ON/ OFF switch
06– Lock/unlock knob
05
06
03
01
02
04
43
CUADRO 04
PROBLEM
CAUSES
SOLUTIONS
The equipment does not
switch ON.
Wrong star ng procedure.
Motor thermal protec on
turned ON.
Electricity shortage.
Problem with the electric circuit.
Read item 3.1 Star ng.
Wait some minutes and try
again.
Check network.
Call Technical Assistance.
The equipment stops or slows
down when processing the
product.
The belt is sliding.
The safety device on the lid
contact is failing.
Problem with the electric motor.
Adjust the belt tension.
Call Technical Assistance.
The processed product
remains inside the equipment.
The expeller dish is missing.
O
ff
load throat obstructed.
Place the dish.
Clean the throat.
Irregular cut.
Blunt blades or damaged
blades.
Change the plate.
Burnt smell or smoke.
Problem with the electric circuit. Call Technical Assistance.
Damaged cord.
Problems with equipment
transporta on.
Call Technical Assistance.
Abnormal noises.
Problem with the bearings.
Call Technical Assistance.
Summary of Contents for BPS-06-N
Page 24: ...24 11 Electric Diagram 25...
