D
will need to be pressed. A faint click will be heard. If no click is heard then there
is a problem with the power supply.
2.2 SDHC Card - overview
The SDHC card needs to be formatted (FAT 16 or 32) on a PC. The maximum size of SDHC
card that can be used is 32GB and the type is SDHC Class 4.
To insert the SDHC card hold the top of the card with the notched end at the bottom and
facing towards the inside of the enclosure
Slide the SDHC card into the holder and push down until you hear a click. The card is now in
place.
To remove the card, gently press down on the card and then let go. This will release it from
the locking mechanism
2.2.1 Removing & Inserting the SDHC Card in Use
The SDHC card is located inside the enclosure and is quite visible when the lid has been
removed.
PLEASE DO NOT ATTEMPT TO REMOVE THE SDHC CARD WITHOUT FOLLOWING THESE
INSTRUCTIONS
1)
Press the button next to the SDHC card/SDHC card holder.
2)
A blue LED will light up. This will be alight for 1 minute and 20 seconds, which
should be ample time to remove the SDHC card and insert a new one. Only
remove the SDHC card when the LED is alight. If you attempt to remove the
SDHC card while the blue LED is off, then you can damage or corrupt the SDHC
card.
8
Notched end
