D
display status, offload data, configure and calibrate the logger, etc, returning the user to the
Main Menu when the individual task is completed.
Main Menu mode can only normally be left and Logging Mode re-entered by pressing
Escape on the PC keyboard.
NOTE – always press Escape to leave Main Menu mode and return to Log Mode. Else the
logger will not record any data and batteries will drain quickly.
4.2
Main Menu Mode Options
This is accessible from the SkyeLynxComms software
Main Menu mode is entered from Logging Mode by choosing File and Wake Up Logger, or
by pressing a numeric key on the keyboard during the ‘listening’ period of the D, 1
second after the ANY NUMERIC KEY TO WAKE UP message is seen. A menu of options is
displayed as below and may be selected from by typing the menu option number or letter:
SKYE INSTRUMENTS LTD. MINIMET SERIES
SEND CHARACTER SHOWN TO SELECT ITEM
<ESC> RETURNS TO LOGGING
-
MAIN MENU -
0) DISPLAY READINGS FROM ALL ACTIVE CHANNELS
1) DISPLAY CURRENT SETUP
2) DISPLAY SOFTWARE VERSION
3) OFFLOAD 24HOUR DATA SUSDHCHCARY
4) OFFLOAD DATA
5) RESET MEMORY
6) SET CLOCK
7) SET DATAFILE I/D, PLUS MEM OVERWRITE & TIMED LOGGING MODES
8) SET CHANNEL SAMPLE & LOG INTERVALS
9) SET AX+B CALIBRATION FACTORS
A) SET CHANNEL CONFIGUR’NS
B) SET INT’NL RH% SENSOR CALIB’N
C) SET ALARM RELAY(S)
D) SET CHANNELS FOR NONZERO / THRESHOLD LOG MODES
E) ENTER ‘LOG ON DEMAND’ MODE
In general upper case characters are expected. <Escape> will cancel almost all operations
before changes take effect!
Not all of these options apply to all models of the D family and consequently,
those functions that do not apply to a particular unit will be found to be inoperative.
20
