manualshive.com logo in svg

Skydio Skydio X2, Operator'S Manual

Share
Download
Skydio Skydio X2 Operator'S Manual Download Page 79

75

Skydio X2

 Color/Thermal - Operator Manual

© 2022 Skydio, Inc. All rights reserved. 

Compliance statement

Software license

Additional Resources

These devices comply with Part 15 of the FCC Rules and with ISED Canada license-exempt RSS standard(s). 

Operation is subject to the following two conditions: (1) these devices may not cause harmful interference, and (2) 
these devices must accept any interference received, including interference that may cause undesired operation. 

Ces appareils sont conformes aux normes RSS exemptes de licence d’ISDE Canada. Leur fonctionnement est soumis 
aux deux conditions suivantes: (1) ces appareils ne doivent pas causer d’interférences nuisibles, et (2) ces appareils 
doivent accepter toutes interférences reçues, y compris les interférences susceptibles d’entraîner un fonctionnement 
indésirable.

Changes or modifications not expressly approved by Skydio could void the user’s authority to operate these devices. 

These devices have been tested and found to comply with the limits for a Class A digital device, pursuant to part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when 
these devices are operated in a commercial environment. These devices generate, use and can radiate radio 
frequency energy and, if not installed and used in accordance with the user guides, may cause harmful interference 
to radio communications. Operation of these devices in a residential area is likely to cause harmful interference in 
which case the user will be required to correct the interference at his own expense.

This Class A digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de classe A est conforme a la norme Canadienne NMB-003. 

The Skydio software end-user license agreement (available at 

www.skydio.com/legal/eula

) governs the use of any 

Skydio software that is pre-installed, downloaded, installed or otherwise provided in connection with any included 
hardware.

For all the latest information about Skydio and our products, visit 

www.skydio.com

.

 
For legal information, visit 

www.skydio.com/legal

. 

Skydio products are protected by patents and trademarks, registered in the U.S. and other countries. More 
information can be found at 

www.skydio.com/legal/ip

. 

Legal

Summary of Contents for Skydio X2

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands