manualshive.com logo in svg

Skydio Skydio X2, Operator'S Manual

Share
Download
Skydio Skydio X2 Operator'S Manual Download Page 23

19

Skydio X2

 Color/Thermal - Operator Manual

© 2022 Skydio, Inc. All rights reserved. 

Configure drone settings

The settings menu allows for the configuration of in-flight controls of X2. The controller must be connected to the 

drone to access the drone settings. View and configure before launch.

Pre-flight

WARNING:

 Flying with Close, Minimal or Disabled obstacle avoidance settings greatly increases risk of collision. 

Minimal or Disabled obstacle avoidance settings are used to navigate tight spaces and should only be used if you 
are an experienced pilot. Skydio recommends turning down Controller throttle, roll and pitch sensitivity to the lowest 
setting and proceeding at a max speed of 2 mph (3 m/s).

Height Ceiling

 -

• 

adjust - the maximum altitude between 30 ft (10 m) and 1500 ft (457 m)

• 

disable - the maximum allowed flight altitude

Indoor Height Ceiling

 - (enabled by default) prevents you from flying above 

66 ft (20 m) when your drone does not have access to GPS and cannot see 
the sky. Disabling the Indoor Height Ceiling setting does not persist across 
flights or power cycles.

Obstacle Avoidance:

 adjust the distance X2 will fly from obstacles

•  Standard

 (default) - 34 in (86 cm) from obstacles

                         top air speed is 25 mph (57 km/h)

•  Close

 - 11 in (28 cm) from obstacles

                         top ground speed is limited to 18 mph (29 k/m)

•  Minimal

 - 4 in (10 cm) from obstacles

                         top ground speed is limited to 18 mph (29 k/m)

•  Disabled

 - will not avoid obstacles

 

           top ground speed is limited to 18 mph (29 k/m)

Height Limits: 

set maximum allowed altitude

Summary of Contents for Skydio X2

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands