Skydio Skydio X2 Operator'S Manual Download Page 34

Page: 34 / 80

Skydio X2

Color/Thermal - Operator Manual

Battery indicator messaging displays how much battery is available for flight, how much battery is available for a
return trip, and how much battery is required to land.

Flight

Battery indicator

NOTE:

Flight time dynamically changes based on altitude and distance to home.

Percentage

- displays battery charge remaining

Green

- indicates battery capacity for nominal flight before the time limit required to safely return and land

Yellow

- indicates how much battery capacity is required to safely return

Red

- indicates how much battery capacity is required to land

Countdown

- when the battery capacity has less than two-minutes, the indicator will begin a countdown

Landing

- when the battery capacity is zero the indicator will change to an alert symbol and X2 will land

Show Thermal

(X2E Color/Thermal only) - toggles the display of the

thermal camera live feed.

•

On (default) displays live feed from the color and thermal
cameras as well as a small picture-in-picture (PIP) feed from the
thermal camera

•

Off and only the live feed from the color camera will display

Picture-in-picture (PIP)

(X2E Color/Thermal only) - live feed of the

thermal camera. Tap on the PIP to toggle between viewing the
thermal camera feed full screen and the color camera feed full
screen.

Summary of Contents for Skydio X2

















































































Search results

Summary of Contents for Skydio X2

Reviews:

Brands by name

Popular brands

Skydio Skydio X2, Operator'S Manual

Search results

Summary of Contents for Skydio X2

Reviews:

Brands by name

Popular brands