manualshive.com logo in svg

Skydio Skydio X2, Operator'S Manual

Share
Download
Skydio Skydio X2 Operator'S Manual Download Page 62

58

Skydio X2

 Color/Thermal - Operator Manual

© 2022 Skydio, Inc. All rights reserved. 

Maintenance

For optimal performance, Skydio recommends replacing your propellers after 

100 hours 

of flight time or if they are 

damaged. 

Always replace all three propellers in the hub.

 Replacing all three propellers will reduce any potential 

variation between the propellers and track propeller flight time.

If you purchased the Skydio X2 Propeller Kit or an X2 bundle, you received 
the equipment necessary to replace your propellers:

• 

clockwise (CW) propellers blades (6)

• 

counter clockwise (CCW) propeller blades (6)

• 

replacement propeller screws (12)

• 

torque driver tool that is included with your Skydio X2

Replace propeller blades

WARNING:

 Propellers with hairline cracks or large breaks, chops, or bends should be replaced immediately. Do NOT 

fly the X2 with propellers that are not in good condition as serious bodily harm or injury may occur.

WARNING:

 Propeller blades are sharp. Handle with care. Always ensure X2 is turned off before replacing the 

propellers to avoid injury. Do NOT attempt to replace your X2 propellers while the Skydio X2 is powered on. Doing 
so is an extreme safety risk and may lead to serious bodily harm or injury. 

Step 1

 - Identify the damaged propeller

Step 2

 - Hold onto the motor or the propeller hub to stabilize the motor

Step 3

 - Unscrew the propeller pin using the Torque driver

• 

slide the propeller out of the propeller hub, then repeat with the 
remaining two propellers in the hub

• 

replace all three propellers in that hub. All three replacement 
propellers must come from the same replacement kit

• 

dispose of the removed propellers

Summary of Contents for Skydio X2

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands