manualshive.com logo in svg

Skydio Skydio X2, Operator'S Manual

Share
Download
Skydio Skydio X2 Operator'S Manual Download Page 13

9

Skydio X2

 Color/Thermal - Operator Manual

© 2022 Skydio, Inc. All rights reserved. 

Getting Started

Charging Batteries

The Skydio Dual Charger simultaneously provides current to two batteries. However, It will prioritize charging 
the battery with the highest charge first—the excess input power will begin charging the second battery. Allow 
approximately two hours to fully charge batteries.

Step 1

 - Slide one or both batteries down the guard rails onto the dual charger

• 

magnets will engage to seat the battery

Step 2

 - Connect the USB-C cable to the 100 W power adapter and the Dual Charger

Step 3

 - Plug the power adapter into a 100-240 V power source

Using Skydio X2

Using the Skydio Dual Charger

Step 1

 - Slide the battery into the battery tray until it is fully seated 

Step 2

 - Connect X2 using the USB-C cable and 100 W power adapter

Step 3

 - Plug the power adapter into a 100-240 V power source

• 

X2 will power on

• 

battery lights will begin to flash

The current charge level is accessed by pressing the power button on the battery:

Battery Charge Levels

WARNING:

 Skydio X2 batteries are seated using magnets that may potentially attract metallic debris. Prior to 

installing your battery, visually inspect the magnets and connector pins, to ensure that they are clean and free of 
debris or damage. Do not use batteries if the magnets or connector pins are damaged. 

Summary of Contents for Skydio X2

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands