manualshive.com logo in svg

Skydio Skydio X2, Operator'S Manual

Share
Download
Skydio Skydio X2 Operator'S Manual Download Page 51

47

Skydio X2

 Color/Thermal - Operator Manual

© 2022 Skydio, Inc. All rights reserved. 

Flight

INFO

: Skydio may recognize bushes, trees, and similar obstacles as potential surfaces. Pilot the drone to an open 

area free of obstacles before initiating a landing. If a flight is initiated by taking off from a case (or a case is placed 
at Skydio X2 exact take off point), GPS positional accuracy cannot be relied upon to guarantee a case landing when 
using the Return to Home function (or in the case of a Return To Home triggered by lost communication).

Step 1

 - Descend to 15 ft (4.6 m)

Step 2

 - Select and hold Land

• 

Skydio X2 will descend

• 

below 10 ft (3 m) obstacle avoidance will be disabled for the remainder of the landing

• 

during landing you may nudge the drone forward, backward, left, or right

• 

yaw control is disabled during landing

• 

cancel the landing by increasing altitude or selecting Cancel Landing

Land

Use the case for a landing pad to avoid disturbing dirt and debris:

Step 1

 - Position the drone about 10 ft (3 m) above the case

Step 2

 - Tilt the camera down so the case and Skydio logo are clearly in view

Step 3

 - Select and hold Land

• 

a yellow ring will circle the Skydio logo

• 

if you do not see the yellow ring, cancel the landing and try again

Case landing

INFO

: Skydio X2 may identify bushes, trees, and similar obstacles as potential surfaces. Pilot the drone to an open 

area free of obstacles before initiating a landing. If a flight is initiated by taking off from a case (or a case is placed 
at exact launch point), GPS positional accuracy cannot be relied upon to guarantee a case landing when using the 
Return to Home function (or in the case of a Return To Home triggered by lost communication).

CAUTION:

 Piloting or nudging the vehicle during a case landing will cancel the case landing and continue with a 

normal landing. Be careful not to accidentally touch the controller joysticks while X2 is performing a case landing.

When you are ready to land your drone, stop any subject tracking or autonomous actions and manually fly the drone 

to a stable landing spot that is clear of debris and people.

Summary of Contents for Skydio X2

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands