45
Use this option as an alternative to entering settings via the
Cutter Control
tab. It can be accessed from
the
Properties
button in the
Send to be Cut
window:
In the
Vinyl Spooler
window, click on the
Cut Options
tab and the cut settings are located in the lower
section of that window:
•
These settings should be understood thoroughly, as you will be adjusting them often as you change
materials or as your blade dulls over time. Note the prior screenshot shows the section number to go to for
more information.
3.3 Cut Settings
•
Before presenting the various settings, note that the
Force
and
Speed
settings can be set on the control
panel itself. In order to cut from SignMaster and use the settings on the Skycut, uncheck these boxes in
either of the two places where the settings can be made:
Send to be Cut
>
Cutter Control
window:
Vinyl Spooler>Cut Options
window:
Section 3.3.2
Section 3.3.4
Section 3.3.3
Section 3.3.1
Uncheck these boxes if
Speed
and
Force
settings on Skycut are to be used
Click
Properties
to open
Vinyl Spooler
window
