SkyBell 2.0, Installation Manual

Page: 9 / 17

Door Frame Adapter Accessory
This accessory allows you to install
your SkyBell onto a door frame.
Note: your door frame should be
2.5 inches thick and a flat surface.
1.
To get started, pass the wires through the center hole of your
door frame adapter.
2.
Place the door frame adapter against your door frame so that
the extended portion sits flush against the outside of the door
frame. Be sure that the lip around the center hole faces you.
3.
Place the wall mount directly on top of the door frame adapter
and position so that the bottom part of the wall mount is the end
with the set screw. Be sure to pass the wires through the center
hole of the wall mount.
4.
Secure the wall mount and the door frame adapter to the door
frame with the screws. Be sure that the adapter is flush and tight
against the door frame and the wall mount is level.
Follow the rest of the installation instructions on page 10.
For more support documentation, visit:
http://www.skybell.com/support
15 16