SkyBell 2.0, Installation Manual

Page: 4 / 17

2
POWER CONFIGURATIONS
Prior to installing your SkyBell, make sure your home is
compatible with one of the power configurations listed.
Power configuration diagrams are available at
www.skybell.com/support/power
.
Unless otherwise indicated, all power configurations require
primary power (110/120 VAC in the US and 220/230/240 VAC,
in Europe) and a low-voltage
transformer (10-36V 10 VA).
1. A MECHANICAL DOOR CHIME AND LOW VOLTAGE
TRANSFORMER
(Recommended)
.
2. A DIGITAL DOOR CHIME WITH ADAPTER AND A LOW
VOLTAGE TRANSFORMER.
4. Router Band -
SkyBell will only connect to the 2.4 GHz
band. If you have a dual-band router, you must create unique
SSIDs for the 2.4 and 5 GHz bands. Prior to initiating the
syncing process, make sure your mobile device is connected to
the 2.4GHz SSID.
5. Router b/g/n -
SkyBell works on the b/g network. If you
have an “N-Only” router, please activate the b/g setting.
6. Router Channel Bandwidth -
Make sure your router is
configured to 20 MHz bandwidth.
7. Transformer -
If your SkyBell is being powered by your
home’s transformer, the transformer’s output must be between
10 and 36 VAC 10 VA.
8. Accessories -
For more information on installing an
accessory, please visit section 4 before starting the installation.
5
6