Get the most from Sky±HD
22
If the set up didn’t work
If you followed the set up carefully but can’t see TV Guide at the end of it, follow these simple steps:
1
Check and make a note of which TV channel you use for watching Sky digital TV.
2
Press
tv
on your remote.
3
Hold down
select
and the
green
button together until the red light on your remote blinks twice (this is after about 2 seconds).
4
Key in the channel number your TV uses for watching Sky digital TV and press
select
and hold for
2 seconds
. The red light blinks, meaning
the remote settings are made properly.
If your TV’s brand isn’t listed on
page 80
, you can try an alternative set up. This involves programming your remote to the TV’s specific model
code instead of the brand code, as follows:
1
First, you need to check the model code for your TV; press
interactive
, press
down
then select
Sky Customer Service
.
Select
Programme Your Remote
and follow the relevant options until you get to the model code for your model number.
Make a note of the code.
2
Point the remote away from the TV and Sky±HD box and press the
tv
button.
3
Press and hold the
select
and
red
buttons together until the red light blinks twice.
4
Enter the
model code
.
5
Press
Sky
to complete the set up.
6
Now check the settings; point the remote at the Sky±HD box and press
tv
then number
3
. You should now be able to see a terrestrial
TV channel.
If you have tried these options and still can’t use your Sky±HD remote with your TV, call Sky Customer Service on the number provided in
the
Terms & Conditions
document you received with your Sky±HD box.
23
Alternative set up
81
