www.sky-frame.com
07.12.2016
13.4.1.37
3. Connecting the empty conduits:
The drive housing provides two 22 mm holes
to allow the installer to fit the intended
conduits for field wiring, one for Mains
Connections, the other one for a Class 2 wall
control switch.
Not intended to be installed using rigid metal
conduits.
4. Connection of the mains voltage and switch
cable:
The button cable (see 8.4) is attached to the
following terminals:
1
2
3
1 = OPEN
2 = GND
3 = CLOSE
The mains voltage (120 V) must be connected to the plug coupling
(see also “8.8 Wiring diagrams”).
WARNING