www.sky-frame.com
07.12.2016
13.4.1.30
7.6
Installation of further sliding elements
The followers of the further sliding elements are already pre-installed.
Installation procedure:
First check of running characteristics:
The glass which has already been inserted
must first be checked manually for ease of
movement of the sliding element [OK?].
If the sliding element if difficult to move,
suitable measures must be taken to optimise
the running characteristics.
Attaching the follower to the bar:
Slide glass to side so there is sufficient room
for attaching the follower (same as for the
profile installation).
First remove the two countersunk head screws
that are in the follower, then lift the relevant
follower onto the bar at the top and screw
them together.
RISK OF FAULT
Before installing the profile (e.g. labyrinth) the sliding element must
be positioned behind the other element in such a way that the
labyrinths can subsequently engage in each other correctly!