54
Replacement Procedures
Service Manual
SKOPE TME ActiveCore
LED Tube Side
Lighting
LED tube side lit cabinets are lit by one or two T8 LED tube side lights, which
can be replaced without moving shelves or product.
To replace an LED tube side light
1. Isolate the chiller from the power supply.
2. Remove the diffuser by
squeezing it until it is
released from the
aluminium housing, and
then push the diffuser out of
the way.
3. Rotate the LED tube until
the pins on the ends of the
tube align with the slots,
then slide it out.
4. Fit a new LED tube. Ensure
the LED tube is fitted with
the ‘Power’ end at the top
(usually marked ‘POWER’
or similar).
Note:
If present,
the pointer at each end of
the tube should be set to
the “0” position.
5. Refit the diffuser by slipping the back section into the housing, then squeezing
and snapping the front section of the diffuser into place as you work down the
length of the light.
Diffuser
LED Tube
Pins
LED tube
Lamp holder
Summary of Contents for ActiveCore SKT series
Page 1: ...TME SKT ActiveCore SKOPE Top Mount Vertical Chiller Service Manual MAN11097 Rev 4 2 May 2019 ...
Page 32: ...32 Spare Parts Service Manual SKOPE TME ActiveCore Glass Door Assembly 1 2 3 3 4 5 6 7 8 9 ...
Page 34: ...34 Spare Parts Service Manual SKOPE TME ActiveCore Solid Door Assembly 2 3 4 7 8 2 6 5 1 ...
