52
Installation
Service Manual
SKOPE TME ActiveCore
Top Shelf Light
& Ticket Strip
Adjustment
Cabinets fitted with shelf lights are supplied with additional grey coloured
shelf light clips. If required, these can be fitted in place of the existing
standard top shelf light clips to lower the top shelf light and ticket strip,
providing greater visibility to the top shelf.
Follow the procedure below to fit the grey clips.
To lower the top shelf light and ticket strip
4. Support the weight of the shelf and lift it up off the shelf clips. Be careful not
to damage the connected shelf light cables running through the front shelf
clips.
5. Slide the shelf clip in each of the shelf support strips to the desired position
(see “To slide a shelf clip up and down” on page 51). The shelves can be
repositioned as far as the shelf light cable reasonably allows.
6. After the shelves have been securely positioned, connect cabinet to the
power supply and check for correct operation.
7. Reload the shelves with product.
1. Isolate the chiller from the power supply (see “Replacement Procedures” on
2. Unclip the shelf light
assembly from the front
of the shelf.
Take care of the wires
while handling the shelf
light.
3. Slide the ticket strip off
the clips.
4. Detach the two standard
clips from the light, and
replace with two grey
clips.
5. Slide the ticket strip onto the the grey clips.
6. Fit the shelf light assembly onto the front of the shelf.
7. Connect cabinet to the power supply and check for correct operation.
Ticket strip
Standard clip
Grey clip
Light
Summary of Contents for ActiveCore SKT series
Page 1: ...TME SKT ActiveCore SKOPE Top Mount Vertical Chiller Service Manual MAN11097 Rev 4 2 May 2019 ...
Page 32: ...32 Spare Parts Service Manual SKOPE TME ActiveCore Glass Door Assembly 1 2 3 3 4 5 6 7 8 9 ...
Page 34: ...34 Spare Parts Service Manual SKOPE TME ActiveCore Solid Door Assembly 2 3 4 7 8 2 6 5 1 ...
