Double-sided floor covering
Overview
Depending on the equipment, the vehicle may be
equipped with a double-sided floor covering in the
luggage compartment. One side is made of fabric,
the other side is washable.
Rigid boot cover
Removing and inserting
The maximum load of the other fastening nets is
1 kg.
Removing
›
Unhook the straps.
›
Hold the raised cover
in place and press the
underside of the cover
on both sides.
›
Remove the cover.
Inserting
›
Insert the mount
A
opposite the holder
B
on both sides of the
boot.
›
Press on the cover
from above until it en-
gages.
›
Hook in the retaining
straps.
Store the cover behind the rear seats
›
Push the cover up be-
tween the rear seats
and the bracket
A
.
WARNING
The boot cover stowed behind the rear seats re-
stricts the driver's rear view.
Roll-up luggage compartment cover
Operation
Extending
›
Pull out the cover on
the handle until it clicks
into place.
Retracting
›
Press the cover in the
handle area.
The cover rolls up to
the intermediate posi-
tion
A
.
Press again to fully
open the cover.
It is possible that the
cover rolls more slowly
during winter weather
conditions.
155
Storage space and interior equipment ›
Double-sided floor covering