Ski-Doo MX Z 800 2145 2002, Operator'S Manual

Page: 95 / 123

93
MAINTENANCE
Vehicle Cleaning and Protection
Remove any dirt or rust.
To clean the entire vehicle, use only flannel cloths or equivalent.
CAUTION: It is necessary to use flannel cloths or equivalent on
windshield and hood to avoid damaging further surfaces to clean.
To clean the entire vehicle, including bottom pan and metallic parts
use BOMBARDIER Cleaner (P/N 293 110 001 (spray can 400 g) and
P/N 293 110 002 (4 L)).
CAUTION: Do not use Bombardier Cleaner on decals or vinyl.
For vinyl and plastic parts, use Vinyl & Plastic Cleaner (P/N 413 711 200
(6 x 1 L)).
To remove scratches on windshield or hood use BOMBARDIER Scratch
Remover Kit (P/N 861 774 800).
CAUTION: Never clean plastic parts or hood with strong detergent,
degreasing agent, paint thinner, acetone, products containing
chlorine, etc.
Clean sheaves of both pulleys using Pulley flange cleaner (P/N 413
711 809).
Inspect the hood and repair any damage.
Touch up all metal spots where paint has been scratched off. Spray
all metal parts including shock chromed rods with BOMBARDIER LUBE
(P/N 293 600 016).
Wax the hood and the painted portion of the frame for better protec-
tion.
NOTE: Apply wax on glossy finish only. Protect the vehicle with a cover
to prevent dust accumulation during storage.
CAUTION: The snowmobile has to be stored in a cool and dry place
and covered with an opaque tarpaulin. This will prevent sun rays
and grime from affecting plastic components and vehicle finish.

WARNING
It is recommended that the assistance of an authorized SKI-
DOO dealer be periodically obtained on other components/
systems not covered in this guide. Unless otherwise specified,
engine must be cold and not running. The tether cord cap must
be removed for all maintenance procedures.
Mmo2002-006b.book Page 93 Thursday, November 29, 2001 2:31 PM