105
If correct tension is unattainable, contact an authorized SKI-DOO dealer.
1. Adjustment screw
2. Loosen screw
Alignment
NOTE:
Track tension and alignment are inter-related. Do not adjust one
without the other.
Start the engine and accelerate slightly so that track barely turns. This
must be done in a short period of time (1 to 2 minutes). Check that
the track is well centered; equal distance on both sides between
edges of track guides and slider shoes.
WARNING
Before checking track alignment, ensure that the track is free
of all particles which could be thrown out while track is rotat-
ing. Keep hands, tools, feet and clothing clear of track. Ensure
no one is standing in close proximity to the snowmobile.
2
A33F03A
1
Mmo2002-006b.book Page 105 Thursday, November 29, 2001 2:31 PM
Summary of Contents for MX Z 800 2145 2002
