Ski-Doo Formula MACH 1, Shop Manual

Page: 214 / 304

Section 06 ELECTRICAL
Subsection 06 (TESTING PROCEDURE)
06-06-9
M: Male F: Female
NOTE:
It is important to take note that voltage measurements must be taken while starting the vehicle using the
manual starter.
Voltages obtained upon starting are proportional to the force applied onto the manual starter. A low
voltage is therefore normal under a low cranking force.
Perform testing in the prescribed order and replace any parts not performing according to specifications.
It is important to resume all tests when replacing a component.
If not specified, the probe connecting sequence is not important.
LIGHTING SYSTEM TESTING (CK3 series — 290 W)
Part
Test to be
performed
Wire
color
Multimeter
probe
connection
Resistance
Ω
Voltage V
Note
Value
(Ohms)
Multimeter
scale
Value
(Volts)
Multimeter
scale
Lighting
generator
coil
Output
YL and
YL
2-01B-F
and
2-01C-F
00.0 -
00.5
00.0
Ω
3.0 - 7.0 00.0 VAC
Coil
insulation
YL and
engine
2-01(B,C)-F
and
engine
0.L
00.0
M
Ω
— —
The term "engine" refers to the
engine metal parts connected to
the magneto housing.
Ground
continuity
BK and
engine
2-01A-F
and
engine
00.0 -
00.5
00.0
Ω
— —