Ski-Doo Formula MACH 1, Shop Manual

Page: 208 / 304

Section 06 ELECTRICAL
Subsection 06 (TESTING PROCEDURE)
06-06-3
3. IGNITION SWITCH, TETHER
CORD SWITCH AND
EMERGENCY SWITCH
TESTING
Disconnect connector housing from engine and
check resistance as indicated in IGNITION table.
TYPICAL — 290 W
1. BK/YL wire, 10-01 housing (harness side)
2. BK wire, 10-05 housing (harness side)
If readings are acceptable, go on to next step.
If readings are inadequate, individually check each
switch as follows.
DESS Switch
Unplug 10-03 housing connected to main wiring
harness. Check using a multimeter by connecting
probes to BLACK/GREEN and BLACK/WHITE
wires. The multimeter should indicate a closed
circuit (0.L
M
Ω
) in operating position and a open cir-
cuit (0
Ω
) in off position.
TYPICAL — HARNESS REMOVED FOR CLARITY
1. 10-03 housing disconnected
2. DESS cap in place
TYPICAL — HARNESS REMOVED FOR CLARITY
1. 10-03 housing disconnected
2. DESS cap removed
A30E0LA
2 1
A30E0MA
1 2
A30E0NA
2
1