Ski-Doo Formula MACH 1, Shop Manual

Page: 185 / 304

Section 05 TRANSMISSION
Subsection 08 (GEARBOX)
05-08-4
5,7,8, Screws and Locking Tab
Tighten screws in a criss-cross sequence starting
with the one above reverse axle. Install reverse
axle screw and bend locking tab against screw
head flat. Bolt shift linkage to shifter.
ADJUSTMENT
28, Chain
Fully tighten adjustment screw by hand, then
back off only far enough for hair pin to engage in
locking hole.
OIL CHANGE
Place a container under bottom pan (gearbox
side).
Unbolt gear shift linkage from fork axle. Unbolt
and remove cover by separating it from housing
and by moving it toward the front in order to re-
lease fork from sliding sprocket.
Clean cover interior.
NOTE: It is normal to find metallic particles stuck
to dipstick magnet. If bigger pieces of metal are
found, disassemble and check all parts.
Reinstall cover as previously described during as-
sembly.
Fill housing with chaincase oil (P/N 413 8019 00).
Oil capacity is 250 mL (8.5 oz).
Check oil level with dipstick. Oil level must be be-
tween MIN. and MAX. marks.
TYPICAL
1. Dipstick
2. Oil level
3. Level between marks
A30D0AA
1
3
1
2