14
EN
EN
1.17 Initial commissioning, daily start-up
Ensure that:
○
All safety devices are completely available
and functional
○
All connections are correctly connected
○
All parts are correctly installed
○
All warning labels on the product are
present completely, highly visible and
undamaged
○
Illegible or missing warning labels are to
be replaced without delay
○
All components used must be designed
for:
- maximum operating pressure
- maximum / minimum ambient
temperature
- the lubricant to be supplied
- the ATEX zone required
- the operating / ambient conditions at
the place of usage.
○
No parts of the centralized lubrication
system may be subjected to torsion,
shear, or bending.
○
Check all parts prior to their usage for
contamination and clean, if necessary.
○
Lubricant lines should be primed with
lubricant prior to installation. This makes
the subsequent ventilation of the system
easier.
○
Observe the specified tightening torques.
When tightening, use a calibrated torque
wrench.
○
When working with heavy parts use sui-
table lifting tools.
○
Avoid mixing up or wrong assembly
of dismantled parts. Mark these parts
accordingly.
1.18 Cleaning
○
Risk of fire and explosion when using
inflammable cleaning agents. Only use
non-flammable cleaning agents suitable
for the purpose.
○
Do not use aggressive cleaning agents.
○
Thoroughly remove residues of cleaning
agents from the product.
○
Do not use steam jet and high pressure
cleaners. Electrical components may be
damaged. Observe the IP type of protec-
tion of the pump.
○
Cleaning work may not be carried out on
energized components.
○
Mark damp areas accordingly.
1. Safety instructions
