!
Notice
Air pockets in cartridge
lubricant will cause gun to lose its prime
and will cause grease output
measurements and cartridge level
readings to be inaccurate.
Fig. 2
21
17
8
17
PowerLuber set up
Install/replace grease cartridge
1
Unscrew the grease tube assembly
(17)
from the grease gun (
† fig.1
,
pg. 11
).
2
Pull back on the follower handle (
21
) and
latch the follower rod groove into the slot
on the tube cap.
3
Remove the plastic cap from the grease
cartridge and insert cartridge into the
container tube.
4
Remove pull tab from grease cartridge and
screw the grease tube assembly (
17
) into
the pump assembly (
8
).
5
Thread grease tube assembly (
17
) back
onto the power head.
6
Using follower handle (
21
), release follower
rod from slot.
7
Purge air from grease tube. Refer to
Expelling air pockets, pg. 14.
12
A &
A HYDRAULIC
800-992-9898
