To reduce risk of injury, user
must read the instruction
manual.
W A R N I N G
Maintenance
The PowerLuber has been designed to
operate over a long period of time with a mini-
mum of maintenance. Continuous satisfactory
operation depends upon proper tool care and
regular cleaning.
Your charger does not require any mainte-
nance apart from regular cleaning.
!
Notice
Before performing any maintenance
on tool and/or charger, remove battery
from tool and/or unplug charger.
• Regularly clean ventilation slots in tool
and/or charger using a soft brush or dry
cloth.
• Regularly clean motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
Vibration
The declared vibration emission values
stated in the technical data and the declara-
tion of conformity have been measured in
accordance with a standard test method
provided by
EN 60745
and may be used
for comparing one tool with another.
The declared vibration emission value may
also be used in a preliminary assessment of
exposure
.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC
to protect persons regularly
using power tools in employment, an
estimation of vibration exposure should con-
sider, the actual conditions of use and the
way the tool is used, including taking account
of all parts of the operating cycle such as the
times when the tool is switched off and when
it is running idle in addition to the trigger
time.
!
Notice
Vibration emission value during ac-
tual use of power tool can differ from de-
clared value depending on ways tool is used.
Vibration level may increase above level
stated.
6
A &
A HYDRAULIC
800-992-9898
