WARNING
Depressurize all lubrication lines of
carrier unit before performing
maintenance or repair.
Failure to comply may result in death
or serious personal injury.
WARNING
Pump PS must be installed by
qualified personnel. Connection of
V AC must be done according to
National Electrical code.
Disconnect and lock out incoming
power before installation or service
of pump.
Failure to comply may result in death
or serious personal injury.
WARNING
Do not exceed maximum specification
ratings (
† Table
). Failure to comply
may result in damage to component.
Failure to observe safety instructions,
(e. g. touching electrically charged parts
when pump is opened, or improper
handling of PS pump) may cause
death or serious personal injury.
C AUTION
Turn off power supply before filling
pump with lubricant on pumps that fill
from top.
Failure to comply may result in personal
injury or damage to component.
C AUTION
Never put hand into open reservoir
while pump is running. Risk of injury
exists with pumps being filled from
reservoir top.
Failure to comply may result in personal
injury or damage to component.
C AUTION
Do not use pump in potentially explosive
applications.
Failure to comply may result in personal
injury or damage to component.
C AUTION
Do not over fill reservoir. Extreme
pressure can cause reservoir to explode.
Failure to comply may result in personal
injury or damage to component.
Operation,
maintenance and
repair
Repair
Repair should only be performed by
authorized and instructed personnel familiar
with instructions.
Defective printed circuit boards should be
appropriately packed and returned to
factory.
Operation/maintenance
Pump PS:
• Must be refilled at regular intervals
with clean lubricant recommended
by manufacturer.
• Operate automatically; however, check
every two days to ensure lubricant is
pumped to all lubrication points.
Disposal
Waste (e.g. used oil, detergents, lubricants)
must be disposed of in accordance with
relevant environmental regulations.
Dispose of used or contaminated
lubricants as well as parts that were in touch
with lubricant according to legal regulations
pertaining to environmental protection.
Observe safety data sheets of lubricants used.