4
4.4 Workpiece Push Parts
4.4.1 Push Knife
When the wood less than 120mm to be cut, the push knife shall be used to prevent
hand from approaching to the saw blade.
Push Knife Push Knife Seat
4.4.2 Push Knife Seat
When cutting narrow workpiece, lean the workpiece against the rip fence with push
knife seat that may be self-made by the operator.
5.5
Assembly
4.5.1 Installation of Panel Saw
The panel saw shall be on hardened and flat floor than is enough to bear the weight
of machine without necessity of special foundation. There shall be enough space on
the installation site, as shown in figure, so as to install the equipment and operate
large-size wood. There shall be a certain safety distance between other parts and other
machines indoor to prevent hurting other personnel.
Summary of Contents for SNB-12A
Page 1: ...MACHINERY SKETCHNBUILD...
Page 27: ...25 Circuit Diagram...