![background image](http://html1.mh-extra.com/html/wen/cv414/cv414_instruction-manual_956451001.webp)
Top View
Clockwise
Brings Feed Screw Out
Counterclockwise
Sends Feed Screw In
INSTRUCTION MANUAL
MODEL 414CV, CV414
4.5-INCH CROSS VISE
INSTRUCTION MANUAL
ASSEMBLY
1. Remove all components and parts from the box. Your cross vise includes the following hardware:
•
(3) Hex Wrenches
•
(2) Locking Nuts
•
(2) Flat Washers
•
(2) Crank Handles
2. If necessary, adjust the longitudinal (top) feed screw until the handle-mounting portion of the feed
screw protrudes beyond the vise body, as shown in Fig. 1 below. Turning the feed screw clockwise
retracts it; turning it counterclockwise advances it. Turn the feed screw fully clockwise until it can no
longer retract.
3. Mount one of the crank handles on the leadscrew, as shown in Fig. 2 below.
4. Secure the crank handle to the feed screw using the included flat washer and locking nut (Fig. 2).
Tighten the nut (turning clockwise) against the handle using a 10 mm socket (not included), then
back it off a quarter turn (turning counterclockwise). Turn the handle a couple of times. If it is difficult
to turn, loosen the nut. Adjust the nut as necessary to ensure that the handle turns smoothly and
advances the slide properly.
5. Repeat the same procedure to mount the remaining crank handle on the cross feed screw.
Fig. 1
Out
Top View
Feed Screw
Flat
Washer
Locking
Nut
Crank Handle
Fig. 2
EXPLODED VIEW & PARTS LIST
V. 2022.04.08
Compatible with WEN Drill Presses: 4210, 4212, 4214, 4225, 4227
No.
Part No.
Description
Qty.
1
413CV-001
Base
1
2
413CV-002
Nut
1
3
413CV-003
Saddle
1
4
414CV-004
Gib
2
5
413CV-005
Hex Nut, M6
1
6
413CV-006
Set Screw, M6x15
4
7
413CV-007
Flat Washer, M6
2
8
414CV-008
Longitudinal Feed
Screw
1
9
413CV-009
Cross Feed Screw
1
10
413CV-010
Retaining Plate
1
11
413CV-011
Socket Head Bolt,
M6x16
4
12
413CV-012
Crank Handle
Assembly
2
13
413CV-013
Locking Nut, M6
2
No.
Part No.
Description
Qty.
14
414CV-014
Leadscrew with
Handle
1
15
414CV-015
Guide Rod
1
16
414CV-016
Body
1
17
413CV-017
Socket Head Bolt,
M6x12
4
18
414CV-018
Movable Jaw
1
19
413CV-019
Dog Point Set Screw,
M6x10
1
20
414CV-020
Jaw Plate
1
21
414CV-021
Grooved Jaw Plate
1
22
413CV-022
Retaining Plate
1
23
413CV-023
Set Screw, M6x20
2
24
413CV-024
Lock Washer, M6
4
25
414CV-025
Ball Bearing
1