skcinc.com
Form 37169 Rev 210311
Page 8
Interpreting and Navigating Screen Displays
The screen displays are intuitive with messages and selection prompts to guide you through each
operation. Icons at the top right and left corners indicate battery and operation status, activated features,
and alerts (
see Status Icons
).
Note: After approximately 30 seconds of inactivity, the screen will dim
automatically. To undim, press the green button or red button
.
Home Screen
When you turn on the noise dosimeter, the Home screen appears
(
see right).
From the Home screen, calibrate, scroll through virtual
dosimeters, access History and Voice Note, and turn off the device.
Virtual Dosimeter Screens
Each programmed virtual dosimeter has a Home screen with the
following parameters set to the particular standard, e.g., OSHA HC or
PEL, ACGIH, MSHA HC or PEL, or custom:
•
Exchange (Exchange rate)
•
Threshold
•
Criterion (Criterion level)
•
Response
•
Freq weight (Frequency weight)
Octave bandwidth screens are displayed if enabled in DataTrac dB
Software. To view the parameter and bandwidth screens, use the
Previous/Next buttons to scroll to them.
Note: For more details on
enabling octave bandwidths, see Using DataTrac dB Software.
History Screens
Press the History button (
Figure 1
) to access sample data.
See Reviewing Data
.
Status Icons
Icons
Indication
Battery charge level (
see Determining Battery Charge Status
)
Sample running
Sample run paused
Lock feature activated
Overload: % Dose set in DataTrac dB Software reached during sample run
OSHA HC Measurement view screens
Lock icon*
Battery
status
icon
Time/date
ID/Name
Firmware
version no.
Serial no.
* See Lock Feature.